CNC PLATE POSITIONING AND PUNCHING
SYSTEM
Model SEMI-PAXY - For Plate, Angle, and Channel
This is an X-Y coordinate positioning table
utilizing your choice of either a Fagor 102 CNC Control or a Windows-based touch-screen
control with GEKA Pro PC
software. The Semi-Paxy may be factory fitted onto any GEKA
Ironworker or Single-End Punch with a 20" or larger throat.
Operation: The operator enters the hole punch positions
into the control. The program moves the guides to the first hole position. The operator
places the material against the guide stops and punches the first hole. The guides then
move automatically to the next punching position, according to the programmed information.
The operator repositions the material against the guide stops and punches the second hole.
Operation continues until program is finished.
| Model SEMI-PAXY Specifications |
| X-Travel: |
40” (Optionally extendable
up to 216”) |
| Y-Travel: |
16”, 20”, or 25” |
| Speed (X & Y Axis): |
24” to 480” per minute |
Minimum positioning
distance from center
line die: |
1” |
| Positioning tolerance: |
± 0.003” |
|
