COMEQ, Inc. [TITAN Rolls]

PRESS RELEASE

Our line of Sheet and Light Plate Bending Rolls, Type IP, has been marketed by LUNA of Sweden for over 20 years, and built by Titan Rolls of Nossebro, Sweden. By recent agreement, the machines will now be produced and marketed under the TITAN name. Please note, however, that the quality and service are exactly the same as they have been for decades.

This is a modern, initial-pinch type machine capable of rolling full or partial cylinders. The machine is simple to operate yet produces high quality rolling results very efficiently. The three rolls are journalled in anti-friction roller bearings. The upper and lower rolls are driven by a worm gear motor with built-in braking, providing a single rolling speed. Variable rolling speeds are optional. The upper roll is securely locked in place at the outboard end while rolling. To remove finished cylinders, the top roll is easily released and automatically balanced as it is swung to the side. Both the lower roll and the rear bending roll are easily adjusted by handwheels through worm gears.* The handwheels, located at the end of the machine frame, raise and lower both ends of the roll together, maintaining true roll position and eliminating the need to adjust both ends of the roll individually. With the standard equipment, the machine is ready to run and fill almost every requirement.

Capacities and Specifications

Machine
Size

Operating
Length

Capacity
Mild Steel

Diameter
of Rolls

Rolling Speed
Feet/Min.

Motor
HP

Weight
Lbs.

Price

IP 60/2

25"

14 ga.

2.36"

3/4

350

$8,576

IP 60/3

40"

16 ga.

2.36"

3/4

470

$8,840

IP 80/3

40"

13 ga.

3.15"

870

$14,153

IP 100/3

40"

10 ga.

3.93"

1�

1460

$16,801

IP 110/3

40"

3/16"

4.33"

1�

1540

$17,068

IP 140/3

36"

1/4"

5.51"

2200

$23,731

IP 60/4

50"

18 ga.

2.36"

3/4

530

$9,074

IP 80/4

50"

14 ga.

3.15"

960

$14,476

IP 90/4

50"

12 ga.

3.54"

1100

$14,874

IP 110/4

50"

7 ga.

4.33"

1�

1680

$17,311

IP 140/4

48"

1/4"

5.51"

2500

$24,274

IP 80/5

60"

16 ga.

3.15"

920

$15,085

IP 90/5

60"

14 ga.

3.54"

1160

$15,202

IP 110/5

60"

10 ga.

4.33"

1�

1810

$17,739

IP 130/5

60"

3/16"

5.12"

2480

$23,972

IP 90/6

80"

16 ga.

3.54"

1370

$15,778

IP 100/6

80"

14 ga.

3.93"

1�

2100

$18,135

IP 120/6

72"

10 ga.

4.72"

1�

2150

$19,018

IP 140/6

72"

3/16"

5.51"

3100

$25,819

IP 110/8

96"

16 ga.

4.33"

1�

2300

$19,116

IP 120/8

96"

14 ga.

4.72"

1�

2500

$19,719

IP 140/8

96"

1/8"

5.51"

3700

$27,589

(Other Intermediate Sizes Available) - Updated 6/2008

Standard Equipment

Rolls journalled in anti-friction roller bearings *
Swing-out upper roll (drop end)
Brake motor and controls for 3/60/220/440
Portable push button controls for Forward/Reverse, on a trailing lead
Low voltage at the controls
Safety cable at front and rear of machine
Indicator scale for the position of the bending roll
Longitudinal groove in the rear roll

Optional Equipment

Cone bending attachment, including tiltable rear roll with built-in dial indicator *
Motor powered bending roll adjustment *
Motor powered lower (clamping) roll adjustment *
Push button controls mounted in a swing-arm *
Variable rolling speeds *
Hardened and ground or rubber covered rolls
CNC Controls