left_corner.jpg (1192 bytes)
PRIMELINE
right_corner.jpg (1275 bytes)


PRIMELINE Hydraulic Downstroking Press Brakes

primeline_logo.jpg (16004 bytes)
Primeline70X8.jpg (43374 bytes)
Model 70 X 8
PRIMELINE Press Brakes are constructed of steel plate weldments amply-sized for the rigidity and stability to fully withstand the applied pressing forces and to keep deflection at the lowest possible level. They are fully hydraulic, with downstroking rams and utilize proven torsion-bar design for ram parallelism. The hydraulic system incorporates two cylinders and a high volume pump to assure quiet operation and is located for easy access. Cylinder pistons are ground, hard-chrome plated. Mechanical depth stops, which are built into the cylinders, are infinitely adjustable, and thus assure the highest level of repeatability and trueness of bend along the entire bed length. An electronic digital readout indicates the position of the stops. Stroke length can be adjusted and controlled. Two speed ram advance is standard. Controls are contained in a swiveling console mounted on the machine for convenient operation; and, there is also a movable pedestal with two-hand (palm button) control and emergency stop button. Electrics are for 3-phase, 60 Hz, 220/440 volt, with low voltage at the controls.

Machine · Tooling · Power Back Gauge · Power Ram Adjustment

Standard Press Brake Models
MODEL CAPACITY   MODEL CAPACITY   MODEL CAPACITY
40 X 4 4' x 40 Tons 175 X 10 10' x 175 Tons 225 X 12 12' x 225 Tons
45 X 6 6' x 45 Tons 225 X 10 10' x 225 Tons 260 X 12 12' x 260 Tons
70 X 8 8' x 70 Tons 260 X 10 10' x 260 Tons 350 X 12 12' x 350 Tons
100 X 8 8' x 100 Tons 350 X 10 10' x 350 Tons 175 X 14 14' x 175 Tons
100 X 10 10' x 100 Tons 135 X 12 12' x 135 Tons 225 X 14 14' x 225 Tons
135 X 10 10' x 135 Tons 175 X 12 12' x 175 Tons 350 X 14 14' x 350 Tons
Higher capacity machines available by request!
Primeline350X12.jpg (139592 bytes)
Model 350 X 12 PP
3 Equipment Packages to choose from:
Silver Package
· Power Front-operated Back
      Gauge with electronic digital
      readout & manual fine tuning
· 2 Finger Stops
· Power Ram Adjustment
      with electronic digital readout
· 2 Front Support Arms
· Work Light
· Sheet-metal Guards
      at rear & sides of machine
· Front-to-back Die Wedge
      compensation device for
      tooling wear and crowning
      applications
Standard Package
· All Silver Package features
·
Upper Gooseneck
      Forming Punch
· Multiple-opening Lower Die
Platinum Package
· All Standard Package features
·
200-step 2-axes Programmable
      Back Gauge Control
· Lower Die Holder
      for American lower dies
COMEQ Home Page
© Copyright 2006 COMEQ, Inc.