 |
World's
Largest Section Bending Machine ROUNDO, AB of Hässleholm, Sweden, world-renowned builder of plate and section bending rolls, has done it again! ROUNDO has now shipped the Model R-21, which eclipses the Model R-15S as the world’s largest section bending machine ..... |
||
| New
Digital Readout Kit for ROUNDO Machines For customers with early model ROUNDO Angle and Plate Bending Rolls with the Dial Indicators (clock scales) or Tape Scales, which show the position of the bending rolls, we have assembled a kit to upgrade your machine ..... |
|||
| World's
Largest Angle Bending Roll Holloway Company, Inc. of Ft. Worth, Texas, a full-service rolling company, has recently installed the largest angle bending roll in the world. The new Swedish-built ROUNDO Model R15S, weighing over 150,000 pounds ..... |
|||
| Did
you know ROUNDO makes Roller-levellers? We have installed a ROUNDO Model PRH 500/10 roller leveller at a new facility in Birmingham. This machine has the capacity to level 10’ x 1-1/2" thick A-36 steel, fed from flat plate or from coils. The machine features 7 levelling rolls ..... |
|||
| |
|||
 |
COMEQ further expands AMERICOR with Four-Roll Bending Rolls and Angle Bending Rolls
New Four-Roll Sheet and Plate
Rolls
New Angle Bending Rolls |
||
|
COMEQ Expands AMERICOR Bending Roll Line In an effort to expand our offerings in light sheet and plate bending rolls, we are pleased to announce the introduction of four new heavy-duty models to our AMERICOR line of three roll single pinch bending rolls. These new offerings expand the range of models with roll diameters of 7.87” (200 mm), and feature hydraulically-powered lower pinch roll and rear bending roll adjustment, and hydraulic drop end as standard features. In addition, an electronic digital readout displaying the position of the rear bending roll is also standard. These heavy-duty machines are now available in lengths of 4’, 5’, 6’, 8’ and 10’, with capacities from ¼” to 9/16”. Cone bending is facilitated by the standard cone bending attachment and the power tilting of the rear roll. In addition, the rolls are hardened to 45 Rc, so scarring of the rolls during cone rolling is virtually eliminated. A unique feature of these machines is the rapid gap setting of the lower pinch roll. By inserting a small piece of material of the thickness to be rolled into a gap-setting device next to the control console, the device will automatically stop the elevating of the powered pinch roll when the thickness gap is correct. The customer can have a set of small thickness templates that can be used to speed the set-up of the next rolling job. |
|||
| Introducing New Line of Notchers As a supplement to the current line of quality metal fabricating machinery, COMEQ, Inc. is proud to offer the new AMERICOR LE series of Hydraulic fixed angle notchers. In addition to the standard triangular notch these machines also offer ..... |
|||
| Plate
Bending Roll Price Roll-back COMEQ, Inc., the exclusive distributor for AMERICOR plate bending rolls in the United States and Canada, is pleased to announce that the prices for most of the models of AMERICOR Initial Pinch Bending Rolls have been reduced ..... |
|||
| |
|||
 |
COMEQ
Introduces the "AD" line of GEKA Ironworkers GEKA Hydracrop Model's 55, 80 and 110 now feature a standard machine with single-speed and a deep throat up to 24" aptly labeled the "AD". This allows customers the deep-throat punch they need without the additional speed and cost of the "SD" models. |
||
| COMEQ
Introduces the GEKA BENDICROP Ironworker Model BENDICROP with punching capacity of 50 tons and 3" x 3" x 5/16" angle shear. Featuring: Vertical slide with 5 workstations including an integrated Press Brake station and a fully structural die block. Ideal machine for ornamental and miscellaneous fabricators! Optional integrated blades available for shearing cap rail, small channels, and square bar. |
|||
| COMEQ
Introduces the GEKA ALFA 500 Eliminate detail and automate the punching and shearing of all your base plates, connection plates, and clip angles with the GEKA ALFA 500 (Automatic Line for Flat and Angle) processing machine. No other manufacturer offers a machine ..... |
|||
| COMEQ
Introduces the GEKA ALPS 150 COMEQ introduces the ALPS 150 to it's popular line of GEKA machinery! This machine is ideally suited for fabricators of communication towers as well as many other types of structural steel fabricators requiring high production ..... |
|||
| COMEQ
Introduces the ALRS System COMEQ introduces the ALRS system (Automatic Line Roller Shear) to the already popular GEKA Ironworker product line! The ALRS system is a CNC-controlled flat bar feeding and shearing system which can be mounted on the GEKA ..... |
|||
| |
|||
 |
New WA
Series NITTO KOHKI Portable Mag Drills Introducing the new NITTO KOHKI WA Series! This is a Portable Automatic (Auto-feed) Mag Drill. This new version of the already popular QA Series automatic mag drills offers all of the features that you need with an incredibly low price ..... |
||
| Portable
Automatic Mag Drills and Hydraulic Punches We now offer portable automatic mag drills and hydraulic punches by NITTO KOHKI. For on-site hole-cutting in steel plates, shaped bars, frame works, machinery, ship building, bridges, and other structural steel applications ..... |
|||