MODEL BENDICROP 85
Metal fabricators and construction companies often have to perform simple bending operations. GEKA has developed the BENDICROP 85 SD model which, in addition to the cutting, punching and notching stations, holds a permanently fitted bending station with a capacity of up to 8 x 5/8″ Geka’s exclusive Bendicrop 85 SD is a dual cylinder machine with 5 working stations:
Punching station. More powerful, 20″ extended throat (SD version)
Flat bars shearing
Triangular notching station
Round and square bars shearing station
Automatic length stop
Furthermore, it is fitted with a system to reduce deformation when shearing flat bars.
There are two different versions of this model: S (12″ throat) and SD (20″ throat).
Bendicrop 85 SD comes with standard hydraulic hold down system for angles profiles and flat bar cutting stations:
It’s an hydraulic special device, and it has a spring-loaded support system on the plate shearing station to achieve a non-distorted cut.
MODEL BENDICROP 60
Two cylinders ironworker with five work stations exclusive from GEKA.
There are two different versions of this model: S (10″ throat) and SD (20″ throat).
Permanent bending station complying with CE safety standards.
Thanks to the blade holder’s vertical movement, machine has an excellent performance in all its five work stations:
Shear for flat bars
Cutting of round and square bars
Fitted with an anti torque system to minimize deformation when shearing flat bars.
The BENDICROP model is fitted with a touch and cut length stop and is delivered with two V-shaped bending dies of 1 – 9/16″ and 2 – 3/4″.
Permanent bending station complying with CE standards.
Goose neck die-holder for punching of D and E sections on legs and webs. . Quick tool change
Angle shearing without loss of material. Wide range of openings for B and A .
Flat bar and plate shearing system with minimum deformation F miter shearing up to 45º.
Rectangular notching with table Also suitable for tube notching, rectangular notching, etc
Anti torque system for flat bar shearing without deformation.
- 90 Ton punch with a punching capacity of 1-1/2″ x 5/8″ or 1″ x 7/8″
- 18″ x 5/8″ or 12″ x 3/4″ flat bar shearing
- 5″ x 5″ x 1/2″ angle shearing at 90°
- 8″ x 5/8″ bending capacity
- 3-1/2″ x 3-1/2″ x 9/16″ notching capacity
- 65 Ton punch with a punching capacity of 1-1/2″ x 5/8″ or 1″ x 7/8″
- 14″ x 3/8″ (5º) 14″ x 1/2″ flat bar shearing
- 5″ x 5″ x 3/8″ angle shearing at 90°
- 6″ x 3/8″ bending capacity
- 4″ x 3/8″ tringular notching capacity
- Rectangular notcher
- Pipe notcher
- Oversize punching attachment
- Factory installed
- Semi-paxy system and more