These single-cylinder models are great entry level iron workers for those who only require 40 to 55 tons of punching capacity and do not exceed 3″ x 3″ x 5/16″ angle. These iron workers also shear plate, cut round bar square bar, mitre angle and have additional features.
Model Microcrop
40 ton punch 3″ x 3″ x 5/16″ angle with no-slug-loss cut 14″ x 1/4″ or 7″ x 1/2″ plate shear
Features: Easy stroke adjustment; Jog switch; Swing-away stripper; Quick change punch holder; Capability to cut angle on mitre; Remote foot pedal; Available in single-phase; Wide range of accessories; Pre-wired for electric length gauge.
Standard equipment includes: a 39″ electric length gauge and a punch gauging table.
Model Minicrop
50 ton punch 3″ x 3″ x 5/16″ angle with non-deform cut 12″ x 3/8″ plate shear
Features: Adjustable swing-away stripper; Quick change punch holder; Structural die holder; Rapid stroke adjustment; Jog switch for spotting of punch; Angle mitering; Plate support table with guide arms; Starter set of 10 round punches dies; Easy access doors at front and rear for maintenance; Rectangular coper (V-notcher pipe notcher optional); Blades for rounds and squares built-in (channel beam optional).
Standard equipment includes: a 39″ electric length gauge, a punch gauging table and a notcher gauging table.
Model Bendicrop 50
55 ton punch 3″ x 3″ x 5/16″ angle with non-deform cut 14″ x 1/2″ plate shear 4″ x 3/8″ built-in press brake
Features: Adjustable swing-away stripper; Quick change punch holder; Structural die holder; Rapid stroke adjustment; Jog switch for spotting of punch; Angle mitering; Plate support table with guide arms; Starter set of 10 round punches dies; Easy access doors at front and rear for maintenance; Rectangular coper (V-notcher pipe notcher optional); Blades for rounds and squares built-in (channel beam optional).
Standard equipment includes: a unique “built-in” press brake section with a 4″ x 3/8″ flat plate capacity.