(410) 933-8500

Bendicrop 60SD

Bendicrop 60SD Image

Original Price:

$26,250

Special Price:

$24,250

Total Discount:

$2,000

End of Offer:

04/30/2020

Capacity:

70 Tons - Punching Ø 1 1/2" x 7/16" - Flat bar shear 14" x 3/8"

Details:

Two cylinders ironworker with five work stations  Exclusive from Geka.
Model: SD (19 11/16" throat)
Permanent bending station  complying with CE standards.

Thanks to the blade holder's vertical movement, machine has an excellent performance in all its five work stations:

    - punching
    - notching
    - shear for flat bars
    - angle cutting
    - cutting of round and square bars

Fitted with an anti torque system to reduce deformation when shearing flat bars.

The BENDICROP model is fitted with a touch and cut length stop and is delivered with two V-shaped bending dies of 1 9/16" and 2 3/4".

    Permanent bending station complying with CE standards.
    Goose neck die-holder for punching of D and E sections on legs and webs. . Quick tool change
    Angle shearing without loss of material. Wide range of openings for B and A .
    Flat bar and plate shearing system with minimum deformation F miter shearing up to 45º.
    Rectangular notching with table Also suitable for tube notching, rectangular notching, etc¿
    Anti torque system for flat bar shearing without deformation.

Notes:

Fitted with an anti torque system to reduce deformation when shearing flat bars. The BENDICROP models are fitted with a touch and cut length stop and is delivered with two V-shaped bending dies.
> Goose neck die-holder for punching of UPN and H sections on legs and webs.

> Quick tool change.

> Angle shearing without loss of material. Wide range of openings for bars.

> Flat bar and plate shearing system with minimum deformation L mitre shearing up to 45º.

> Rectangular and triangular notching with table. Also suitable for tube notching, rectangular notching, etc.

> Built-in Safety System: The punching guard is linked to a limit switch so that when this guard opens, the punch lowers without pressure during the first pedal interval and rises during the second interval. This makes centering between the die and punch easier and safer for the user.

Contact Us About This Product