Euromac
FX Bend 2550 – Electric Press Brake series
Finally a machine designed to go further. The FX Bend 2550 is a dual motor direct ballscrew pull drive Electric Press Brake.
More tool capacity, increase in the bending length and great versatility, thanks too increased number of usable tools.
Bending length 88,5″ (2550 mm).
Maximum bending force 55 US Ton (500 kN).
TECH SPECS
Specifications
- Max. bending force (US Ton): 55 (500 kN)
- Bending length (inch): 88,5″ (2250 mm)
- Approx. weight (lbs): 14,330 (6500kg)
- Y axes stroke (inch): 10″ (250 mm)
- Y axes speed (in/sec): 8 (200 mm/sec)
- Max tilt (in) (Y1-Y2) + – 0.4″ (10 mm)
- Opening (mm) (table to ram) 335 (435)
- Connections wireless/USB port YES/2
- Motor power (kW) 2×5,2
- Connected load (kWa) 6
- Approx.weight (kg) 6500
6 AXES BACKGAUGE (X1-X2-R1-R2-Z1-Z2)
- X axes stroke (mm) 375 + 705
- R axes stroke (mm) 180
- Z axes stroke (mm) 2350
- X axes speed (in/sec): 4 (1000 mm/sec)
- R axes speed (in/sec): 25.5 (650 mm/sec)
- Z axes speed (in/sec): 32 (800 mm/sec)
